Welcome to Pascal Control | Malaysia Valve Supplier
‘- Suitable for on-off small ball/plug valves and damper automation
– By combination of spur gears, provide very high efficiency
– The motor is a specially designed induction motor that produces high
starting torques and thermally protected from overheating.
– Manual Operation by Spanner and dial position indication
– Very compact and light weight & High Duty Cycle
Installation & operating manual : English_M_ITQ_0040(382)
Dimension : ITQ0040_D_STANDARD(264)
|
General Specifications |
|
|
Enclosure |
IP66, O-ring Sealed |
|
Power Supply |
110,220VAC/1Ph/50,60Hz, 24VDC |
| Control Power |
110,220VAC/1Ph/50,60Hz |
| Duty Cycle (ON-OFF) | S2: 30 min |
| Motor | Induction Motor |
| Limit Switches | 2 ea for Open & Close (5A, 250VAC) |
| Auxiliary Limit Switches | 2 ea for Open & Close (5A, 250VAC) |
| Travel Angle | 90 º ± 5 % |
| Position Indication | Continuous mechanical indicator with arrow |
| Manual Override | Extruded shaft on bottom |
| Terminal Block | Spring loaded push type |
| Cable Entries | 2-PG13.5 with the plastic Cable Gland |
| Space Heater | 5W (110/220VAC) for anti-condensing |
| Ambient Temperature | -20 ~ + 70 ℃ |
| Ambient Humidity | 90% |
| Technical Specification | |||
| Model | ITQ0040 | ||
| Rated Torque (Nm) | 40Nm (4kg.m) | ||
| Duty Cycle S2 | S2: 30 minutes | ||
| Operating Time (Second) 50Hz | 14 seconds | ||
| Operating Time (Second) 60Hz | 12 seconds | ||
| Female Shaft Size (mm) | 14X14mm Double Square | ||
| Motor Insulation Class | E | ||
| Rated Current (Amp.)
50 Hz / 60 Hz |
110 Volt | 0.16 A | |
| 220 Volt | 0.18 A | ||
| 24VDC | 0.8 A | ||
| No. of Handwheel | 7.5 | ||
| ISO 5211 Mounting Flange | ISO F03/05/07 Flange | ||
| Weight ( Kg ) | 3 kgs | ||
