Welcome to Pascal Control | Malaysia Valve Supplier
‘- Newly Designed and developed for especially small ball & plug valves
and damper automation.
– Self-Locking combination of spur and worm gears that require no brake
– The motor is a specially designed induction motor that produces high starting
torques and thermally protected from overheating.
– Mechanical Stopper bolts to prevent from over travel
– Easy set cams without special tool
– Manual operation by wrench directly to the worm gear box and dial postion indication
Installation & operating manual : English_M_ITQ_0080(383)
|
General Specifications |
|
|
Enclosure |
Weatherproof IP67, O-ring sealed |
|
Power Supply |
110,220,/1Ph/50,60Hz, |
| 380,440VAC/3Ph/50,60Hz, 24VDC | |
| Control Power |
110,220VAC/1Ph/50,60Hz, |
| Duty Cycle (ON-OFF) | S2: Max 30 min |
| Duty Cycle (Modulating) | S4: 50%, 1,200 start/Hour |
| Motor | Induction Motor |
| Limit Switches | 2 ea for Open & Close (5A, 250VAC) |
| Auxiliary Limit Switches | 2 ea for Open & Close (5A, 250VAC) |
| Travel Angle | 90 º ± 10 % by external adjustable mechanical stopper |
| Position Indication | Continuous mechanical indicator with arrow |
| Manual Override | Extruded shaft on bottom |
| Manual Operation | By wrench (M6) directly to the worm gear |
| Self Locking | by means of worm gearing |
| Mechanical Stopper | 1 each for each travel end (open & close), external & adjustable |
| Terminal Block | Spring loaded push type |
| Cable Entries | 2-M20X1.5 (Option : 2-PF1/2″) |
| Space Heater | 3W (110/220VAC) for anti-condensing |
| Ambient Temperature | -20 ~ + 70 ℃ |
| Ambient Humidity | 90% |
| Technical Specification | |||
| Model | ITQ0080 | ||
| Rated Torque (Nm) | 80Nm (8kg.m) | ||
| Duty Cycle S2 | S4: 50%, 1,200 start/Hour | ||
| Operating Time (Second) 50Hz | 16 seconds | ||
| Operating Time (Second) 60Hz | 14 seconds | ||
| Female Shaft Size (mm) | 17X17mm double square | ||
| Motor Insulation Class | E | ||
| Rated Current (Amp.) | 110 Volt | 0.97A | |
| 220 Volt | 0.52A | ||
| 380 Volt | 0.52A | ||
| 440 Volt | 0.56A | ||
| 24VDC | 1.9A | ||
| No. of Handwheel | 7 | ||
| ISO 5211 Mounting Flange | ISO F05 & F07 flange | ||
| Weight ( Kg ) | 3.5 kgs | ||
