Welcome to Pascal Control | Malaysia Valve Supplier
RPC | Remote Position Controller
– A combination of electric Positioner (4-20mA input, Proportional)
– By combination of spur gears, provide very high efficiency
and Transmitter (4-20mA continous output signal)
– Auto-Calibration provides the most convenient to the end user without complicated set in Field.
– Auto Calibration
– Reverse Operation Direction
Installation and operating manual: English_M_RPC(393)
|
Specifications |
|
|
Incoming Power |
85~265V AC ± 10%, 50/60Hz ± 2% |
| Option : 24VDC | |
|
Potentiometer(Feedback) |
1 Kohm |
| Input Signal | 4-20mA, 0-10VDC, 2-10VDC, 1-5VDC, 0-5VDC |
| Output Signal |
4-20mA (Option:0-10VDC, 2-10VDC, 1-5VDC, 0-5VDC) |
| Load Resistance | Min. 100 Ohm ~ Max. 750 ohm |
| Visual Indicators | Operating LED (Power/Open/Close/Fault) |
| Input Resistance | 250 ohms |
| Exitation | 2.3 VDC (When User inputs the signal, the min power) |
| Control Output | Relay Contact 250V AC, 16A Max (Resistive Load) |
| No of output contacts | 2 EA (Open and Close Contact) |
| Delay Time Adjustment | 1.0 ~ 8.5 seconds (1step: 0.5 sec, 0~15 step) |
| Dead Band Adjustment | 0.1 ~4.5% (1 step 0.3%, 0~15 step) |
| Resolution | Min 1/1,000 |
| Ambient Temperature | -10 ~ + 60 ℃ |
| Ambient Humidity | 90% RH MAX. (Non-Condensing) |
