Welcome to Pascal Control | Malaysia Valve Supplier
FLOMEC® LCD display RT14 is a fully programmable, self-powered flow rate totalizer specifically designed for computing & displaying flow rates & totals from flowmeters with pulse, sine wave or frequency outputs. The instrument displays resettable (batch) total, accumulated total and instantaneous flow rates in engineering units as programmed by the user. Flowmeter inputs: suitable use with most pulse/frequency output meters such as reed switch, coil, voltage pulse (Wiegand), NPN and PNP.
CONTROL OUTPUTS
An unscaled pulse output serves as an input signal amplifier ideally suited for coil type inputs from turbine or paddle wheel meters. The output can be transmitted over and can be configured for NPN/PNP with wiring connection.
PROGRAMMING
Simple PIN protected flowchart programming with English prompts guide you through the programming routine greatly reducing the need to refer to the instruction manual.
| LCD DISPLAY | 8 digit alpha-numeric LCD display with 12 mm characters with backlight* |
| INSTANTANEOUS FLOW RATE | 8 digit to 3 decimal points |
| ENGINEERING UNITS DISPLAYED | Liters, Gallons, Cubic Meters, Pounds, Kilograms or Nil |
| INPUT TYPES | Reed, NPN/PNP, Variable Reluctance (Turbine flowmeters), Weigand Sensors (voltage pulse) |
| INPUT FREQUENCY | 1.2 kHz (NPN/PNP), 2 kHz (Coil inputs), 120 kHz (Reed) |
| INPUT SCALING RANGE | 0.0001 ~ 9999999.9999 with 4 floating points |
| LINEARISATION | 10 point correction |
| PULSE OUTPUTS | One selectable digital output for scaled pulse, unscaled pulse, high, low or high/low alarms |
| OPERATING TEMPERATURE | -22° F to +176° F (-30° C to +80° C) |
| POWER SOURCES | AA 3.6V Lithium Thionyl Chloride Battery, external voltage option (12 – 30V [dc]) |
| ENCLOSURES | High impact glass reinforced Nylon (PA6) with a Polycarbonate lens, Nitrile O-Ring seals and Polyurethane gaskets, providing an IP rating of IP66/67^ |
| MOUNTING | Meter & stem mount, wall, pipe or panel mount^ |
| * Backlight possible when connected to external power | |
| ^ Panel mount seal kit required to maintain IP66/67 rating when separating front and rear housing for mounting | |
