Welcome to Pascal Control | Malaysia Valve Supplier

09 Display | Flomec

09 Display | Flomec

An excellent choice for most FLOMEC® Meters. Commonly used features are pre-programmed in the display. End-users can enable additional features by using a password available from the factory, or click the button below to find. The 09 configuration provides a high degree of customization, matching customers’ exact needs.

09 CONFIGURATION CODE

USER CONFIGURATION

Using a password-protected configuration process you can enable additional features. GPI Customer Service can provide the password and instructions to unlock and reset configuration settings. This information is also available on the GPI website.

User configuration features include:

  • Totalizers/Modes Enabled (Cumulative Total, Batch 2 Total, Flowrate Mode)
  • Flowrate Timebase (Units per Minutes, Hours and Days)
  • Factory Calibration Curve Units Enabled (Gallons, Imperial Gallons, Litres, Quarts, Ounces, Cubic Feet, Cubic Centimeters, Cubic Meters or Barrels (42 gal.)
  • Dispense/Display or K-Factor Entry Calibration
  • For use with G2, TM, A1 and QSE meters

Features / Benefits

  • 2 Totals (Batch – Resettable, Cumulative – Not Resettable)
  • Flowrate display updates every 5 seconds, readout is in units/minute
  • Factory Calibration in gallons and litres is standard
  • Can be field calibrated to adjust to various fluid thickness
  • Correction calibration lets end-user calibrate by ± percent off
  • Small, compact and totally self-contained with an internal power supply
  • Non-volatile totals means amounts are retained when batteries are replaced or power is lost
  • Lithium battery life: 5 years

Applications

  • For use with G2, TM, A1 and QSE meters

Approvals

A1 & G2 Models ONLY

Related Products