1. Antistatic device ((electrical continuity between ball, stem and body)
Static electricity is avoided which can cause sparks and fire in an inflammable/explosive environment
Contact safety throughout the entire life of the valve
2. Double antifriction washer
Less Breakaway Torque is granted
Less wear comparing with the execution with the single washer
3. “V” seals pack; 3 seals + o-ring
It ensures a perfect tightness even after a high number of cycles
4. Spring washer on the shaft seal
Guarantee of the recovery of the gap due to the wear caused by the rotational movement of the shaft avoiding leakage towards the outside part.
Allow to maintain energized the “chevron” seals (V), thus avoiding any leakage to the outside, against huge temperature excursions
5. Stretch Graphite seal
Tightness towards outside is granted, independently by the thermal excursions to which the valve is subjected
Greater precision in the alignment of axes due to a unique positioning in the process machining from raw material to finished valve
Less breakaway torque
Longer lifetime of the valve
Easy maintainance directly on site
Reduced maintainance costs
Valve body in carbon steel made with NACE certified material as standard
Greater corrosion resistance
Greater ductility of the material
100% in- house manufacturing process technology
Maximum control and accuracy in all the stages of the manufacturing process
Flexibility in supply quickly special executions requested by customers
ATEX Certificate
Installation is possible in a potential explosive environment
TA LUFT fugitive emission Certificate
High level of safety of the tightness towards the outside is granted
PED Certificate
Full compliance with European Safety Standards for Pressure Equipment
UP to SIL 3 certified
Guarantee of the high level of functional safety
